Industry News- Taizhou Dongsheng New Energy Technology Co., Ltd.

A 10 kW array on a pitched tile roof is held down by roughly 50 to 70 small brackets, each fixed to a rafter, each carrying ...

On a coastal rooftop project, a 500 kW array was almost built with standard galvanized steel fixing brackets that did not ha...

A 3.2 MW rooftop array near the coast passed its final inspection in calm weather. Eleven months later, it needed repairs: w...

A typical flat commercial roof can carry more than 100 kW of solar capacity, but that capacity only becomes a productive ass...

Water stains appeared on the ceiling of a commercial building seven months after a BIPV installation was completed. The sola...

A 420 W solar panel leans against a balcony railing, held by two plastic clamps from a bargain kit and a strip of tape. Afte...

A 500 kW array on a distribution-center roof rarely fails because of the modules. It fails where the frames meet the roof: a...

Planning a rooftop solar installation starts with a question: what actually holds the panels up after the installers leave? ...

A 400 W panel is only as safe as the bracket beneath it. Rusted fasteners, undersized rails, or a clamp made for a different...